The water meter module is designed for installation on universal SVK/Puls cold and hot water meters. The module reads meter data and transmits it wirelessly via the LoRaWAN network. The SVK/Puls meter is designed for use with these modules. The module is installed on the meter in a specially designed slot and is then sealed. The meter and module can be used: – in automated information and measurement systems for commercial resource metering, – in monitoring and dispatching systems, – in Smart City projects, – in IoT (Internet of Things) projects.
LoRaWAN module for SVK water meters
Share 
- Power Specifications
- Built-in 3.6V lithium battery
- operating-frequencies-mh
- 864-865; 868.7-869.2 (according to the decision of the State Commission on Radio Frequencies) User reconfiguration is possible.
- Output power
- No more than 25 MW (according to the decision of the State Commission on Radio Frequencies)
- Modulation type
- LoRa
- compliance-with-lorawan-
- +
- Device class
- Class A (according to LoRaWAN specification)
- Channel bandwidth
- 125 kHz
- Data transfer rate
- 0.3-50 kbps
- Maximum packet size
- 50 bytes (including service data)
- Maximum communication range
- - in direct line of sight - up to 15 km
- - in urban areas - up to 1.5 km
- Indication (LEDs)
- Device Operation Status
- RF Module Status
- User interface for customization
- Technological connector. (Connection via an additional converter)
- magnetic-impact-sensor-m
- +
- sensor-for-removing-the-
- +
- Antenna
- Built-in
- Frame
- Plastic (sealed after installation)
- Installation
- Installed on the water meter
- Operating temperature range
- -30 to + 80°C
- Overall dimensions
- 64 × 31.5 mm
- Weight, no more than
- 0.15 kg
- mean-time-between-failur
- at least 150
- 000 hours
- Service life
- 20 years
You can download the manual by clickinghere.
